High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Comms cable, Country-specific detachable power cord, Documentation CD, Installation guide, Network Management Card, Rack Mounting brackets, Rack mounting hardware, Rack Mounting support rails, Temperature Probe, USB cable, Warranty card

Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance

ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.

Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.

Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Scalable runtime Allows additional run time to be quickly added as needed.

Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.

Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.

LED status indicators Quickly understand unit and power status with visual indicators.

Serial connectivity Provides management of the UPS via a serial port.

InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager.

SmartSlot Customize UPS capabilities with management cards.

Network manageable Provides remote power management of the UPS over the network.

Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP.

Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Predictive failure notification. Provides early-warning fault analysis ensuring proactive component replacement.

Disconnected battery notification Warns when a battery is not available to provide backup power.

Audible alarms Provides notification of changing utility power and UPS power conditions

Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used.

Cold-start capable Provides temporary battery power when the utility power is out.

Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances.

Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling.

Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Learn more about APC products on their official website.